2016 JEEP PATRIOT LATITUDE 4X4

The auction record lists the vehicle as having a salvage title certificate, with “FRONT END” recorded as the primary damage. Visible deformation and cracking at the hood, front bumper, and lower front fascia support the stated front-end damage claim. However, the salvage-title status cannot be confirmed from the available photos. The hood has multiple pronounced creases, particularly along the leading edge and center-left area. Its front edge is raised and uneven, leaving a large irregular gap above the grille. The front bumper cover is severely cracked, torn, and separated at both corners, with distorted lower openings, irregular gaps, and exposed areas around the front fascia. A loose electrical connector or wire is hanging below the center of the bumper. The visible front fender also has a folded edge and creasing near the hood seam and upper wheel arch. Minor scrape marks and surface abrasions are present across the bumper face. The available findings are limited to visible exterior damage. A thorough inspection is recommended for the underlying bumper supports, front-end structure, lighting components, wiring, cooling system, steering and suspension, wheel alignment, airbags, and safety systems before purchase or repair. VIN decoding identifies this vehicle as a 2016 Jeep Patriot Latitude SUV/MPV with four-wheel drive, a 2.4-liter four-cylinder gasoline engine, and left-hand drive. It was manufactured by FCA US LLC at the Belvidere Assembly plant in the United States. One NHTSA safety recall is listed for this make, model, and year: recall 16V907000 concerns the crankshaft or camshaft sensor connector, which may cause the engine to stall if the sensor operates intermittently. The stated remedy is replacement of the connector by a dealer at no charge. Recall completion and applicability to this specific vehicle should be verified with an authorized Jeep dealer using the VIN.