2017 JEEP GRAND CHEROKEE SUMMIT 4X4

The vehicle is listed by the auction with a salvage certificate and “FRONT END” as the primary damage classification. The visible evidence supports limited front-end damage: the left side of the front bumper has a missing body-colored trim cover and light surface scuffing. Extensive front-end deformation is not visible in the provided findings. The salvage-certificate status cannot be confirmed from the available evidence. Multiple radiating cracks are present in the upper center-right portion of the windshield. A rectangular panel on the upper passenger-side dashboard is also raised, leaving a visible gap around its edges. Both items require repair or replacement and should be checked for any related damage. The instrument cluster reportedly displays “Service Electronic Stability Control,” ABS/stability-related warning indicators, and a “Service 4WD” warning. These are significant mechanical and electronic concerns. The ABS, electronic stability-control, four-wheel-drive system, wiring, and related control modules should be professionally diagnosed before the vehicle is driven. Several NHTSA recalls are listed for the 2017 Jeep Grand Cherokee. Campaign 18V332000 concerns wiring that could prevent cruise control from disengaging; cruise control should not be used until the applicable repair is confirmed. Campaign 16V686000 concerns loose rear tow-hook bracket bolts on certain vehicles manufactured between August 8 and August 16, 2016. Campaign 17E061000 applies only to certain aftermarket ProCharger superchargers installed on SRT8/SRT models. Campaigns 20V699000, 22V406000, and 23V411000 apply to vehicles equipped with the 3.0L EcoDiesel engine and concern the EGR cooler, high-pressure fuel pump, and crankshaft-position sensor tone wheel, respectively. Recall applicability and completion status for this specific vehicle should be verified with an authorized Jeep dealer using the VIN. A comprehensive pre-purchase inspection is recommended, including diagnostic scanning, ABS and stability-control testing, four-wheel-drive operation, wiring inspection, underbody examination, windshield and dashboard repair assessment, and verification of all recall repairs.