2016 JEEP CHEROKEE LIMITED FWD

The vehicle is a 2016 Jeep Cherokee Limited, VIN 1C4PJLDS7GW281746. Factory VIN data identifies it as a four-door SUV with front-wheel drive (4x2), a 3.2-liter six-cylinder gasoline engine, and left-hand drive. It was manufactured by FCA US LLC at the Toledo North Assembly plant in the United States. The auction lists the vehicle as having a Salvage Certificate with FRONT END as the primary damage. The visible damage supports the stated front-end damage claim; however, the salvage-certificate status cannot be confirmed from photographs alone. The front bumper cover and front fascia are missing. The complete bumper-cover assembly is shown separated from the vehicle, and the open front corner exposes wiring and other internal front-end components below the grille and headlamps. The hood has substantial raised and creased areas across its front portion, particularly on the right side and center, with irregular gaps along the front edge. The windshield is severely damaged, with a star-shaped impact area near the upper center-right and multiple radiating and longitudinal cracks across the glass. The documented damage is concentrated at the front of the vehicle. Replacement of the bumper and fascia components, inspection of the exposed wiring and internal structures, hood repair or replacement, and windshield replacement will be required. Additional damage or mechanical issues cannot be determined from the supplied findings. NHTSA records list recalls associated with this model and year, including campaigns 18V332000 for a cruise-control wiring/software issue, 15V826000 and the superseding 23V338000 for the power-liftgate module and potential fire risk, 16V590000 for seat fasteners, 16V287000 and 16V284000 for potentially defective halfshafts on specified production dates, and 20V343000 and the superseding 23V302000 for power-transfer-unit damage that can cause loss of drive or Park function. Campaign 17V824000 concerns certain Kidde fire extinguishers supplied with applicable vehicles. Recall applicability, production-date requirements, and completion status should be verified with an authorized Jeep dealer using the VIN.