2018 JEEP CHEROKEE LATITUDE 4X4

The vehicle is a 2018 Jeep Cherokee with a salvage-title designation (“CERT OF TITLE-SALVAGE”) and an auction primary-damage classification of “FRONT END.” Stage 1 reports that the visible severe front-end collision damage supports the stated FRONT END classification; however, the salvage-title status cannot be confirmed from photos. The front end has extensive severe damage. The hood is heavily crumpled and folded across the front section, with substantial deformation at both front corners. The front bumper fascia and grille are missing or detached, and additional bumper components, including the license-plate mounting and fog-lamp area, are separated from the vehicle. Both front corners show distorted fender and wheel-arch areas, missing trim, exposed components, and separated wiring. The headlamp assemblies and related mounting components are broken, absent, or detached. The radiator and condenser areas are visibly crushed and bent, while surrounding supports, brackets, plastic covers, and trim are broken, displaced, or missing. Large sections of the front structure remain open, exposing cooling units, hoses, wiring, connectors, and harnesses. The images do not establish the condition of the engine, transmission, drivetrain, suspension, airbags, or vehicle operation. A comprehensive physical inspection and diagnostic assessment would be required before repair or purchase decisions. According to the VIN decode, this is a left-hand-drive Jeep Cherokee SUV/MPV built by FCA US LLC at the Belvidere Assembly plant in the United States. It is identified as a four-wheel-drive vehicle with a 3.2-liter gasoline six-cylinder engine; the decoded data lists 271 horsepower. The transmission type is not specified in the provided data. NHTSA records list several recalls associated with the 2018 Jeep Cherokee. These include campaigns concerning the right-front halfshaft on all-wheel-drive vehicles, cruise-control wiring, front underhood wiring and possible powertrain-control-module failure, tire-and-rim certification labeling, and power-transfer-unit operation. Additional recalls in the records concern the 2.4-liter engine and fuel system; the decoded VIN identifies a 3.2-liter engine, so those engine-specific conditions should be verified for applicability. Recall completion status for this vehicle is not provided and should be confirmed by VIN with an authorized Jeep dealer.