2019 ACURA MDX SH-AWD TECH 7P

This 2019 Acura MDX SH-AWD Tech 7-Passenger is recorded with a “CERTIFICATE OF TITLE” auction condition and “REAR END” as the primary damage. Stage 1’s photo-based review supports the rear-end damage classification, with severe crushing and separation visible at the liftgate and rear bumper. The certificate-of-title condition cannot be verified from the available photos. The rear liftgate has extensive crushing and deep creasing across the centered lower section. The license-plate recess and surrounding panel are deformed, with open gaps and exposed mounting areas. The rear bumper cover is severely crushed, torn, and separated across its width, including both corners. Internal components are exposed, and the lower black trim is displaced. The horizontal chrome garnish across the liftgate is broken and displaced near the center. The right rear corner also shows pronounced deformation involving the liftgate edge, quarter-panel area, and bumper corner, with crushed sheet metal, open panel gaps, and a torn bumper corner. The VIN decode identifies the vehicle as a four-wheel-drive SUV assembled in the United States. It is equipped with a 3.5-liter gasoline V6 engine, a nine-speed automatic transmission, and three seating rows with seating for seven. The supplied NHTSA data lists the following recalls for this model and year: fuel-pump failure recalls 21V215000 and 23V858000; a tailgate-lid and taillight moisture-related lighting recall, 19V256000; a timing-belt recall, 19V298000; a rear-brake-caliper recall, 18V777000; an engine connecting-rod-bearing recall, 23V751000; an updated exterior-lighting recall, 25V259000; a front-passenger seat occupant-classification sensor recall, 26V332000; and a rear-subframe corrosion recall, 26V365000, subject to the specified state and vehicle eligibility requirements. Recall completion status for this vehicle is not provided and should be confirmed by VIN with Acura or an authorized dealer before purchase. The rear-end damage also makes inspection of the tailgate lighting, wiring, rear structure, suspension mounting areas, and related safety systems particularly important.