2017 JEEP RENEGADE TRAILHAWK 4X4

This 2017 Jeep Renegade is listed with a salvage certificate and “REAR END” as the auction’s primary-damage classification. The visible findings support the stated rear-end damage classification; however, the salvage-certificate status cannot be confirmed from the provided images. The rear bumper cover is missing across the lower rear of the vehicle, exposing the bumper reinforcement, tow-hitch assembly, wiring, and internal mounting areas. Both rear tail-lamp assemblies are absent, leaving their lamp cavities and mounting areas exposed. Large sections of the outer body panels at both rear corners, extending around the tail-lamp openings and wheel arches, are missing or torn away. The exposed inner panels, mounting holes, wiring, and irregular metal edges indicate substantial collision damage. Detached black bumper or trim components are visible below and behind the vehicle. The provided NHTSA VIN decode identifies the vehicle as a 2017 Jeep Renegade Trailhawk SUV with all-wheel drive, a 2.4-liter four-cylinder gasoline engine, and a left-hand-drive configuration. The VIN indicates production by FCA Italy S.p.A. in Melfi, Italy. Mechanical, structural, suspension, alignment, electrical, and safety-system operation could not be established from these findings and should be checked during a comprehensive physical inspection and repair estimate. NHTSA records list three recalls associated with applicable 2017 Jeep Renegade vehicles: a possible instrument-cluster software issue, a possible cracked oil-pump housing/balance-shaft module on vehicles with the 2.4-liter engine, and a fuel-pump issue affecting certain 2017–2018 2.4-liter 4x2 flex-fuel/E85 vehicles. Applicability and completion status should be verified by the VIN with an authorized Jeep dealer.