2016 JEEP RENEGADE SPORT 4X2

The auction record identifies this 2016 Jeep Renegade as having a salvage certificate of title, with “FRONT END” listed as the primary damage. The visible extensive front-end damage supports the auction’s front-end damage classification. However, the salvage certificate status cannot be confirmed from exterior photographs alone. The front bumper and lower fascia are severely detached and broken, with separated sections, displaced plastic, exposed internal components, and damage extending across the grille and radiator area. The hood is severely deformed along the front edge and left-front section, creating an uneven raised gap above the grille and headlamp area. The front-left fender is crushed and folded around the wheel opening, while the front-left corner has missing and torn fascia with open gaps and exposed components. The front-left headlamp is missing from its mounting position. A detached headlamp assembly is also shown separately with a heavily cracked lens, damaged housing, and damaged mounting edges. The driver and front-passenger airbags have deployed. The windshield has multiple cracks extending through the driver-side and central viewing areas. The extent of the visible damage indicates that substantial collision repairs will be required, including replacement or repair of exterior panels and fascia, headlamp components, windshield, and the deployed restraint-system components. The condition of the underlying structure, cooling system, suspension, steering, electrical systems, and other mechanical components cannot be established from the supplied findings and should be verified through a comprehensive physical inspection before purchase. According to the NHTSA VIN decode, this is a 2016 Jeep Renegade Sport SUV with front-wheel drive, a 2.4-liter four-cylinder gasoline engine, and left-hand drive. It was manufactured by FCA Italy S.p.A. at the Melfi, Italy plant. Two recall records are listed for this model year. One concerns certain aftermarket Daystar rear control-arm brackets and applies only if the specified spacer kit was installed. The other concerns the factory-installed optional trailer-hitch package and involves insufficient fasteners; applicability should be checked against the vehicle’s equipment and service history. Recall completion and VIN-specific applicability should be confirmed with an authorized Jeep dealer.