2017 JEEP RENEGADE LATITUDE 4X4

The auction record lists the vehicle as having a salvage certificate with FRONT END as the primary damage. The provided photo assessment supports the front-end damage claim, showing severe hood deformation, front-corner panel deformation, bumper separation, and windshield cracking. The photos alone cannot confirm the salvage-certificate status. The hood has multiple large creases and sharply distorted sections across the left and centre areas. Its front edge is raised and uneven, with scuffing and paint disturbance. The left front fender and headlamp-surround area are also creased and deformed, with an open gap between the fender and adjacent front components. The left front bumper cover and trim are separated and have an uneven panel edge near the headlamp. A concentrated spiderweb crack pattern is visible in the lower-left windshield near the wiper area. Several minor horizontal scuffs and scratches are present on the left rear quarter panel above the wheel arch. The instrument cluster displays “BRAKE Service Brake System” along with multiple warning indicators. A photograph cannot establish the underlying cause or confirm the condition of the braking system, so this requires a complete diagnostic inspection before purchase or operation. NHTSA records identify three recalls for certain 2017 Jeep Renegade vehicles. Recall 17V485000 concerns instrument-cluster software that may illuminate malfunction indicators incorrectly. Recall 18V131000 applies to certain vehicles equipped with a 2.4L engine and involves a potentially cracked oil-pump housing/balance-shaft module that could lead to engine failure and stalling. Recall 18V731000 applies to certain 2.4L flex-fuel/E85, 4x2 vehicles and concerns a fuel-pump assembly that may lose fuel pressure under certain operating conditions, potentially causing a stall. Recall applicability and completion should be verified by VIN with an authorised Jeep dealer.