2016 JEEP COMPASS SPORT 4X4

The vehicle is listed with a certificate of title marked “prior salvage,” and the auction’s primary-damage claim is “BURN.” The supplied Stage 1 assessment states that this burn claim requires a physical inspection and cannot be confirmed from the available photos. The reported condition is severe throughout the vehicle. The front windshield and the left-side front and rear door glass are missing, with fragments and damaged material around the openings. The roof perimeter and front windshield header show extensive blackened, melted, and deteriorated material, with exposed substrate along the front roof edge. The hood is heavily crushed and deeply creased across multiple areas, including the leading edge, and has an uneven gap above the grille. The front grille is cracked and broken, with missing or displaced pieces. The engine compartment contains extensive blackened and deteriorated material, exposed wiring, fragmented components, and areas where normal components are absent. The front dashboard and cabin trim are severely deteriorated, with exposed wiring, fragmented material, and multiple missing interior components. The passenger compartment has heavily deteriorated upholstery and trim, damaged floor coverings, and absent or severely damaged seating and interior parts. Large sections of the center and rear cabin floor also show exposed wiring, deteriorated coverings, fragmented material, and corrosion-colored metal surfaces. According to the VIN decode, this is a 2016 Jeep Compass Sport four-wheel-drive SUV with a 2.4-liter four-cylinder gasoline engine. It was manufactured by FCA US LLC at the Belvidere Assembly plant in the United States. One NHTSA recall is listed for 2016 Jeep Compass vehicles: recall 16V907000 concerns an engine crankshaft or camshaft sensor connector that may operate intermittently and cause the engine to stall. Recall completion should be verified by VIN with an authorized dealer. Given the extensive damage and missing components, a comprehensive physical inspection and evaluation of the engine, wiring, structural areas, restraint systems, and all safety-related systems would be required before considering repair or road use.