2020 HYUNDAI PALISADE SEL w/ Convenience Pkg

The auction record identifies the vehicle as having a salvage title and lists FRONT END as the primary damage. Stage 1 reports that the visible front-end collision damage supports the auction’s FRONT END classification; however, salvage-title status cannot be confirmed from the photographs. The front bumper cover is severely damaged on the left side. It is detached and hanging outward, with broken edges and exposed mounting areas. The lower front fascia also has broken plastic sections and an open area where exterior trim is missing. Multiple broken or detached bumper and grille-area plastic pieces are lying on the ground near the vehicle. The front left fender is severely deformed around the wheel opening, with missing sections exposing the wheel-arch liner and components behind the panel. The wheel-arch trim and liner are separated from the body, with portions hanging outward and exposed fasteners or mounting points visible. The provided findings concern visible exterior damage only; further inspection is required to assess hidden structural, suspension, lighting, sensor, or mechanical damage. NHTSA VIN decoding identifies this vehicle as a 2020 Hyundai Palisade SUV/MPV with front-wheel drive (4x2), a 3.8-liter gasoline GDI Lambda II engine, and the SEL trim with Convenience Package. The vehicle was manufactured by Hyundai Motor Co. in Ulsan, South Korea. The supplied NHTSA recall information lists the following campaigns for applicable 2020 Palisade vehicles: 19V802000 for side-curtain air-bag mounting bolts; 22V627000 for the windshield-wiper motor; 22V633000 for a potential tow-hitch harness electrical short and fire risk; 25V607000 for rear seat-belt buckle assemblies; and 26V034000 concerning third-row side-curtain air-bag deployment. Recall applicability and completion should be verified by VIN with Hyundai or NHTSA before purchase.