2026 HYUNDAI KONA SEL Sport

The vehicle is a 2026 Hyundai Kona. The auction lists the primary damage as SIDE. Stage 1 reports that the visible evidence supports this classification, with severe deformation and missing exterior components on the left side. The auction condition is listed as CERTIFICATE OF TITLE; however, this condition cannot be verified from the available photos. The left front fender is missing, exposing the wheel-arch area and inner body components. The left front door has extensive sharp creases, deep depressions, and displaced metal across its upper, middle, and lower sections. The hinge-side door opening and adjacent body area are also severely deformed, with exposed metal and irregular edges. The lower exterior trim strip on the left front door is missing, leaving mounting holes and fasteners exposed. The left rear door has moderate longitudinal creasing and irregular deformation, particularly toward the front and lower sections. The left front edge of the hood is raised, creating an uneven gap with the adjacent front body area. Curtain-airbag fabric is visibly hanging from both roof-side areas, indicating deployment of the left and right curtain airbags. Further inspection is required to determine the condition of the underlying structure, hinges, restraint-system components, steering and suspension parts, wiring, and other mechanical systems. Three NHTSA recalls are listed for certain 2026 Hyundai Kona vehicles. Recall 26V047000 concerns an instrument-panel software fault that may prevent the display of critical information such as speed or warning lights; the remedy is a free software update. Recall 26V069000 concerns front steering knuckles that may crack or break, potentially causing loss of steering control; the remedy is inspection and replacement as necessary. Recall 26V452000 concerns the rear center-seat belt buckle, which may fail to properly restrain an occupant; the remedy is replacement, and the rear center seat should not be used until the repair is completed. Recall applicability and completion should be confirmed using the vehicle’s VIN.