2019 HYUNDAI KONA SE

This 2019 Hyundai Kona is listed with a salvage title and an auction-reported primary damage classification of “FRONT END.” Stage 1 reports that the visible front-end damage supports this primary-damage code; however, the salvage-title status cannot be confirmed from the photos. The front end has substantial collision damage. The hood is deformed near the left-front corner, with an uneven raised gap along its leading edge. The front-left fender and wheel-arch area are severely deformed, with separated panel edges and internal areas exposed. The front-left headlamp assembly is missing, leaving an open cavity. The left side of the front bumper cover is displaced and separated, while sections of the grille and front fascia are broken or missing. The lower front-left lamp and surrounding trim are also detached from their normal position. Internal brackets, wiring, and other front-end components are visible through the damaged fascia. Multiple detached black plastic components are lying on the ground in front of the vehicle. These findings indicate that repairs will require replacement or repair of multiple exterior and front-end components, followed by inspection of the underlying structure, mounting points, wiring, lighting systems, and safety equipment. The provided findings do not confirm the condition of the engine, cooling system, suspension, steering, airbags, or frame. Minor cosmetic scuffing is visible on the rear bumper and lower tailgate area. According to the VIN decode, this is a 2019 Hyundai Kona SE SUV with front-wheel drive, a 2.0-liter four-cylinder MPI Nu gasoline engine, and a six-speed automatic transmission. The vehicle was manufactured by Hyundai Motor Company in South Korea. NHTSA recall campaign 21V301000 covers certain 2019–2021 Hyundai Kona vehicles equipped with the 2.0-liter Nu MPI engine. The recall concerns piston oil rings that may not have been properly heat-treated, potentially causing engine damage, stalling, or an oil leak onto hot exhaust components. Hyundai’s stated remedy includes engine inspection and, if necessary, replacement, along with installation of Piston Ring Noise Sensing System software. The recall completion status for this vehicle should be verified by VIN with Hyundai or an authorized dealer.