2020 BMW Z4 sDrive30i

The vehicle is recorded as a 2020 BMW Z4 sDrive30i convertible with a 2.0-liter four-cylinder gasoline engine and eight-speed automatic transmission. It was manufactured by BMW AG in Austria. The auction record identifies the vehicle as having a salvage certificate with FRONT END listed as the primary damage. Stage 1 reports that the visible front-end damage supports the stated FRONT END classification; however, the salvage certificate status itself cannot be confirmed from the photos. The visible damage is concentrated at the front corner shown on the left side of the images. The bumper cover has cracks, torn edges, scuffing, and an irregular opening around the lower corner and intake trim. The hood corner above the adjacent headlamp is creased and deformed, with an uneven front-edge gap. The nearby front fender is buckled and has scraped paint around the headlamp and wheel opening. The headlamp assembly is severely damaged, with a broken or missing outer lens, exposed internal components, and displacement of the surrounding mounting area. The front fascia and lower intake area also show distortion, irregular gaps, and damaged or displaced black trim. The supplied records list recalls applicable to this vehicle concerning the headlight control unit, headlamp adjustment, rear-view camera software, fuel-tank weld integrity, and the starter relay. The remedies include inspection, software updates, or replacement of the affected components, as applicable. Recall completion should be verified by VIN with BMW before purchase. The documented engine-management recall for loss of braking assistance applies to the Z4 M40i and is not identified here as applicable to this sDrive30i. A thorough physical inspection should confirm the condition of the structural components, lighting system, cooling and electrical systems, suspension, and any safety-system components affected by the front-end impact.