2020 BMW X7 XDRIVE40I

The auction’s primary-damage designation is “Rear.” Stage 1 reports that the visible evidence supports this designation, with extensive damage at the left rear corner, rear bumper, tail-lamp area, and lower rear body. The collision damage is severe. The left rear bumper cover is torn and missing in sections, and the lower trim and surrounding components are broken or absent. Internal brackets, wiring, exhaust-related components, and other lower-rear parts are exposed or displaced. The lower rear hatch and adjacent left rear corner have pronounced dents, creases, and irregular panel surfaces. The left rear quarter-side and bumper-corner areas show extensive crushed and torn surfaces, with missing exterior panels and exposed mounting structure. The outer left rear tail-lamp assembly is missing, leaving an open cavity. A curtain airbag is also visibly deployed and hanging from the roof area along the side of the passenger compartment. The damage findings do not establish the condition of the vehicle’s frame, suspension, exhaust system, electrical systems, drivetrain, or other mechanical components. A comprehensive physical inspection and diagnostic scan would be required, along with verification of airbag-system repairs, wiring integrity, rear-body alignment, lighting operation, and any hidden structural damage. The vehicle should not be considered roadworthy until it has been properly repaired and inspected. The VIN decode identifies this vehicle as a 2020 BMW X7 xDrive40i Sport Utility Vehicle with all-wheel drive, a 3.0-litre six-cylinder gasoline engine, an eight-speed automatic transmission, and seating for seven across three rows. The decoded output lists a 335-horsepower engine and production in Greer, South Carolina, USA. The supplied NHTSA recall data includes several campaigns relevant to 2020 BMW X7 vehicles. These cover the steering rack and pinion (19V631000), rear reflex reflectors (20V052000), rearview-camera software and display operation (19V684000 and 21V096000), the integrated brake system (21V062000), the starter motor or transmission area (20V465000), the front axle support and control-arm bearing bracket (20V678000), the sunroof control unit (22V267000), third-row seat-backrest springs (22V670000), and starter-motor overheating or fire risk (24V576000 and 25V644000). Recall applicability can depend on the exact vehicle configuration and VIN, and the supplied information does not confirm which repairs have been completed. Completion status should be checked directly with BMW or NHTSA before purchase.