2026 BMW X7 XDRIVE40I

This 2026 BMW X7 xDrive40i is listed with a salvage condition and “Left Front” as the auction’s primary damage classification. The photo-based assessment supports extensive collision damage in the front-left area, but also shows damage and missing components on the opposite front corner and at the rear. The salvage title status cannot be confirmed from exterior photographs alone. The front bumper cover, both headlamp assemblies, and the central kidney grille are missing. The radiator assembly, bumper reinforcement, wiring, brackets, and other inner front-end structures are exposed. The hood has a pronounced depressed and creased area on the right-front side, with an uneven leading edge and enlarged gaps. Both front corners have missing exterior components, exposing inner fender areas and suspension-adjacent components. The driver-side front door assembly and window glass are absent, leaving the cabin and inner door opening exposed. The driver-side front fender is creased and deformed around the wheel opening, and the rocker trim and wheel-arch moldings are missing. On the passenger side, the front door window and rear quarter-window glass are absent. Exterior door handles, rocker trim, and wheel-arch moldings are also missing, while the passenger-side front fender is creased and deformed near the wheel arch and front edge. At the rear, the outer lamp assemblies are missing from both rear corners. The rear bumper cover is separated from the left rear corner and does not sit flush with the body. The left rear quarter-window glass is also absent, leaving the opening exposed. The instrument display reportedly shows an “Emergency call system malfunction” warning. This confirms a displayed vehicle warning, but the underlying cause cannot be determined from the available information. According to the VIN decode, this is a U.S.-built BMW X7 xDrive40i with all-wheel drive, a 3.0-liter six-cylinder gasoline engine, and a listed output of 375 horsepower. The VIN is 5UX23EM0XT9038518. Two NHTSA recalls are listed for the 2026 BMW X7. Recall 25V556000 concerns improper windshield sealing, which may allow water to enter electrical components and potentially cause electronic failures or a fire; the remedy involves inspection and repair or replacement as necessary. Recall 25V837000 concerns instrument-panel manufacturing that may prevent the passenger-side air bag from deploying properly; the remedy is replacement of the instrument-panel trim. Recall completion should be verified by VIN before purchase. The vehicle requires a comprehensive physical inspection to assess structural condition, suspension and cooling-system damage, wiring, electrical systems, air-bag and restraint-system status, water exposure through the open glass areas, and the extent of parts replacement and calibration required.