2026 BMW X6 xDrive40i

The vehicle is listed by the auction with a “CERT OF TITLE-SALVAGE” condition and “FRONT END” as the primary damage classification. The salvage-title status cannot be confirmed from the available visual evidence. Stage 1 reports that the visible evidence supports the unverified front-end damage claim: the front bumper, grille, and both headlamp assemblies are missing, leaving front-end components exposed. The front bumper cover and associated fascia are absent. Both left and right headlamp assemblies are missing, with wiring and mounting areas visible. The front grille and surrounding trim are also absent. The front edge of the hood shows irregular deformation and uneven gaps above the exposed components. In the lower front end, the cooling components are exposed, and the large lower heat exchanger appears visibly curved across its width. The extent of any underlying structural, mechanical, electrical, or cooling-system damage requires a complete physical inspection and functional assessment. VIN decoding identifies this vehicle as a 2026 BMW X6 xDrive40i Sport Utility Vehicle with all-wheel drive, a 3.0-liter six-cylinder gasoline engine rated at 375 horsepower, and manufacture in Greer, South Carolina, USA. Two NHTSA recalls are listed for this model and year. Recall 25V671000 concerns possible improper windshield sealing, which may allow water to reach electrical components and potentially cause loss of headlights or door-closing functions, an electrical short, or a fire. The remedy is inspection and resealing of the windshield, with replacement of the vehicle control unit and wiring if required. Recall 25V837000 concerns an incorrectly manufactured instrument panel that may prevent the passenger-side air bag from deploying properly; the remedy is replacement of the instrument-panel trim. The repair status for both recalls is not provided and should be verified by VIN with BMW or an authorized dealer.