2015 BMW X6 xDrive35i

The vehicle is listed with a SALVAGE CERTIFICATE and FRONT END as the auction’s primary-damage designation. The visible missing and damaged front-end components support the stated FRONT END damage claim. However, the SALVAGE CERTIFICATE status cannot be confirmed from the vehicle photos. The front bumper cover and associated fascia are missing, exposing the radiator area, mounting brackets, wiring, and other front-end components. Both front headlamp assemblies and the visible front grille are absent. The hood has pronounced creasing, a raised and irregular front edge, and a wide uneven gap above the exposed front end. Additional front lower-fascia and corner-trim pieces are missing or separated, with broken-looking plastic and exposed mounting areas at both corners. Front wheel-arch trim and liner sections are also absent or detached, exposing fasteners, inner liner areas, and body-side mounting edges. Loose wiring and disconnected-looking connectors are visible near the front corners. Multiple detached black plastic components are lying on the ground below the front end. The VIN decodes this vehicle as a 2015 BMW X6 xDrive35i SUV with all-wheel drive, a 3.0-liter six-cylinder gasoline engine rated at 300 horsepower. It was manufactured by BMW in Greer, South Carolina, USA. One NHTSA safety recall is listed for this model and year: campaign 19V823000, concerning the rear-seat lower child-seat anchor bars. The bars may become damaged when used with an ISOFIX-type rigid connector. BMW’s listed remedy is reinforcement of the anchor bars and vehicle body by a dealer at no charge. The completion status for this specific vehicle should be verified with BMW or an authorized dealer using the VIN.