2016 BMW X6 xDrive35i

The auction records list this 2016 BMW X6 as “CERT OF SALVAGE > 75% DAMAGE,” with “FRONT END” recorded as the primary damage. Stage 1’s assessment found that the visible front-end collision damage supports the FRONT END classification, but that the exterior photos cannot confirm the stated damage extent of more than 75%. The front end has severe damage concentrated around the hood, bumper, grille, and left-front corner. The hood is extensively crushed and sharply creased across the center and leading edge, with displaced metal around the BMW emblem. The front bumper cover is crushed, torn, and displaced, with large irregular gaps around the center and left-side openings. Both kidney-grille surrounds and adjacent grille components are distorted, with irregular spacing and displaced slats. A large gap is visible between the hood and the front-left upper fascia, exposing dark inner components. The front-left bumper and fender junction is also deformed, with irregular panel edges and exposed areas around the headlamp and wheel-arch junction. Additional cosmetic damage consists of light scratches and scuff marks on the visible side doors and rear quarter panel, together with light scuffing on the rear bumper cover, including the lower central area. According to the VIN decoding, this is an all-wheel-drive BMW X6 xDrive35i with a 3.0-liter, six-cylinder gasoline engine. The vehicle is classified as a sport utility vehicle and was manufactured in the United States. The provided findings do not establish the condition of concealed structural, mechanical, electrical, restraint, or cooling-system components; a thorough physical inspection and post-repair systems check are recommended before purchase. One NHTSA recall is listed for this model and year: recall 19V823000 concerns the rear-seat lower anchor bars used for securing child restraint seats. The bars may become damaged over time when used with an ISOFIX-type rigid connector. BMW’s listed remedy is the installation of a reinforcing bracket by a dealer at no charge. Recall completion should be verified by VIN.