2023 BMW X5 xDrive40i

The auction record identifies this 2023 BMW X5 as having a salvage certificate of title and lists “SIDE” as the primary damage classification. Stage 1 reports that the visible severe driver-side collision damage supports the auction’s SIDE classification. The salvage-certificate status cannot be confirmed from exterior photographs. The driver-side front door is severely crushed, with extensive deep deformation, sharp creases, torn areas, heavy scraping, and exposed damaged material. The driver-side front fender is deeply creased and buckled around the wheel arch, with exposed inner wheel-arch material and damaged panel edges. The rocker panel below the front and rear doors has extensive crushing, scraping, exposed metal, displaced lower trim, and visibly damaged or displaced panel sections. The damage extends across the driver-side front quarter, front door, and lower side structure. The driver-side exterior mirror is broken or missing its outer housing, leaving internal components exposed. A large driver-side side-curtain airbag is visibly deployed inside the roof and window area. Because the impact involves the side body structure and a deployed restraint system, the vehicle requires a thorough inspection of the underlying structure, doors, rocker area, wheel-arch components, airbag system, seat belts, electrical systems, and related mechanical components before any repair or road-use assessment. According to the VIN decode, VIN 5UXCR6C04P9N69245 is a 2023 BMW X5 xDrive40i sport utility vehicle with all-wheel drive, a 3.0-liter six-cylinder gasoline engine rated at 335 horsepower, and a U.S. assembly location in Greer, South Carolina. NHTSA records list four recalls applicable to the 2023 BMW X5 range: a possible improperly bonded windshield that could allow water to contact electrical components; a driver’s-seat backrest fastener that may not have been correctly installed; second-row outboard head-restraint guide sleeves that may lack locking tabs; and a transmission-control-module weld-seam issue that could allow oil leakage and possible loss of drive power. Recall completion should be verified by VIN with BMW or an authorized dealer before purchase or operation.