2018 BMW X5 xDrive35i

The vehicle is listed by the auction with a salvage certificate of title and “FRONT END” as the primary damage classification. Stage 1 reports that the visible extensive front-end damage supports the unverified FRONT END classification; however, the salvage-title status cannot be confirmed from photographs. The observed damage is severe and concentrated at the front of the vehicle. The front bumper assembly is detached and broken, with fractured and torn plastic sections, broken mounting points, and exposed internal components. The hood is heavily crushed, with multiple deep creases and sharply folded areas, and it does not form a continuous closed surface. The front bumper cover, grille sections, and both headlamp assemblies are missing. This exposes the radiator area, brackets, wiring, and other internal components. Sheet-metal and plastic edges at both front corners are bent, torn, and irregular. The radiator and other cooling modules are heavily compressed and bowed, while lower cooling components and mounting hardware are visibly distorted. Front support brackets and mounting structures are also exposed, with several pieces bent, displaced, or separated. Multiple airbags are visibly deployed, including the steering-wheel airbag, passenger dashboard airbag, driver-side lower-dash airbag, and side-curtain airbags. The vehicle should be considered non-roadworthy until the complete restraint system, front structure, cooling system, wiring, and all related components have been professionally inspected and repaired. The findings do not establish the condition of hidden structural, mechanical, electrical, or drivetrain components. The VIN decodes as a 2018 BMW X5 xDrive35i SUV with all-wheel drive, a 3.0-liter six-cylinder gasoline engine, and an eight-speed automatic transmission. It was manufactured in the United States. The supplied recall records include campaign 18V439000, concerning a potentially improperly hardened pivot bolt on the front lower-left control arm for certain 2018 X5 xDrive35i vehicles, and campaign 17V727000, concerning front-suspension bolts that may not have been properly tightened on certain 2018 X5 vehicles. Recall completion should be verified with BMW using the VIN before purchase. Other supplied recall entries concern different X5 variants or other BMW models and should not be assumed to apply to this vehicle.