2018 BMW X5 XDRIVE35I

The auction lists the primary damage as rear damage. Stage 1 reports that the visible evidence supports this claim: the rear bumper fascia and corner sections are missing, bumper components are exposed, and a rear lamp assembly is absent. The rear bumper cover is missing from the rear and left rear corner, exposing the bumper reinforcement, absorbers, brackets, wiring, mounting hardware, and other internal structures. Detached bumper components, including the fractured bumper cover and two rear lamp assemblies, are visible on the ground behind the vehicle. The lower rear bumper fascia is also absent across the lower edge, and the left outer rear lamp is missing from the quarter-panel opening. Repair will require inspection and replacement of the damaged or missing bumper components, lamp assemblies, mounting hardware, and any affected wiring or underlying structures. The supplied findings do not confirm the condition of the vehicle’s mechanical systems, body structure, or safety systems. The VIN decodes this vehicle as a 2018 BMW X5 xDrive35i SUV with all-wheel drive, a 3.0-litre six-cylinder gasoline engine, and an eight-speed automatic transmission. It was manufactured in the United States. The supplied NHTSA recall information includes campaign 18V439000 for certain 2018 BMW X5 xDrive35i vehicles, concerning the front lower-left control-arm pivot bolt, and campaign 17V727000 for certain 2018 BMW X5 vehicles, concerning improperly tightened front suspension bolts. The other supplied campaigns apply to specific diesel, hybrid, or portable-charger equipment configurations and may not apply to this vehicle. Recall completion should be verified by VIN with BMW or an authorised dealer before purchase.