2023 BMW X5 sDrive40i

This 2023 BMW X5 is listed with a salvage certificate of title, and the auction’s primary damage classification is “rear end.” Stage 1 reports that the visible evidence supports the rear-end classification because substantial damage is present at the rear bumper and lower tailgate; additional front-end damage is also visible. The rear damage is severe. The left rear bumper cover is detached and hanging outward, with a substantial section broken away or missing. Internal components and mounting areas are exposed. The bumper is heavily deformed across the lower-left and center sections, with an irregular displaced edge, multiple scuffs, and scraped areas. The lower left and central tailgate also have inward dents and broad creasing below and around the license-plate mounting area. Moderate front-end damage is visible as well. The front lower bumper and both visible corner areas have displaced or separated sections, broken or missing black trim, uneven edges, and exposed mounting areas. The outer molding at the front left wheel arch is missing, leaving exposed fastener points and an unfinished edge. The front left fender has an inward dent and irregular crease near the hood and wheel arch, with additional scratches and scuffing on the fender and adjacent bumper. According to the VIN decode, this is a U.S.-built BMW X5 sDrive40i SUV with a 3.0-liter six-cylinder gasoline engine rated at 335 horsepower. The decoded equipment includes standard ABS, electronic stability control, traction control, forward-collision warning, blind-spot monitoring, rear cross-traffic alert, rear visibility assistance, lane-departure warning, and curtain, front, knee, and side airbags. The VIN data does not specify the transmission or additional options. NHTSA records list four recalls for this vehicle’s make, model, and year: a potentially improper windshield bond, a possible driver’s-seat backrest fastening issue, second-row outboard head-restraint guide sleeves that may lack locking tabs, and a transmission control-module manufacturing defect that may allow oil contamination and possible loss of drive power. The completion status of these recalls should be confirmed with BMW or an authorized dealer before purchase. A thorough inspection is recommended, including the bumper mounting points, tailgate structure, front-end components, lighting, sensors, wheel-arch area, alignment, and any systems potentially affected by the collision damage.