2024 BMW X5 sDrive40i

This 2024 BMW X5 is listed at auction with a salvage vehicle title and “SIDE” as the primary damage classification. Stage 1 reports that the visible severe passenger-side door and quarter-panel damage supports the stated SIDE claim; however, the salvage-title status cannot be confirmed from the photos. The passenger-side rear door has extensive, deep crushing, sharp creases, and broad paint abrasion across the outer panel, including around the handle and lower section. The passenger-side front door also has multiple dents and creases along its rear and lower-to-mid outer panel. Severe deformation is visible on the passenger-side rear quarter panel ahead of and above the rear wheel, extending toward the rear door opening and wheel arch. A section of the black trim or liner at the forward edge of the rear wheel arch appears detached, with exposed attachment points. Separately, a black lower front-bumper lip or air deflector is hanging on the vehicle’s left side, leaving a visible gap from the adjacent bumper section. The VIN decodes as a 2024 BMW X5 sDrive40i, a gasoline-powered SUV with a 3.0-liter six-cylinder engine rated at 375 horsepower. The vehicle was manufactured by BMW in Greer, South Carolina, USA. The provided data does not establish the condition of the underlying structure, suspension, wheel alignment, airbags, braking system, or mechanical components. A comprehensive physical inspection and diagnostic scan are recommended before purchase, particularly because the visible damage involves multiple body panels and the rear wheel-arch area. NHTSA records list several recalls associated with 2024 BMW X5 vehicles, including campaigns concerning the driver and passenger knee airbags (23V471000 and 23V622000), the integrated brake system and possible loss of power brake assist, ABS, or stability-control functions (24V104000, 24V697000, and 24V739000), and potential instrument-panel manufacturing defects affecting airbag deployment (24V138000). Campaign 24V327000 concerns an incorrect tire-information placard on certain X5 xDrive40i vehicles, while campaign 26V422000 concerns inspection or replacement of the integrated brake system on certain X5 vehicles. Recall applicability and completion status should be confirmed directly by VIN with BMW or NHTSA before the vehicle is operated.