2017 BMW X5 sDrive35i

The auction record identifies the vehicle as having a salvage title and lists the primary damage as front-end damage. Stage 1 reports that the visible severe damage at the front right corner supports the front-end damage code; however, a salvage title cannot be confirmed from exterior photographs alone. The most significant damage is concentrated at the front right corner. The right portion of the front bumper cover is severely broken and partially missing, with torn edges, displaced pieces, and components exposed behind it. The right headlamp assembly is displaced, has broken housing areas, and exposes internal components. The leading section of the right front fender is crushed and torn around the headlamp and wheel opening. The right front edge of the hood is raised and deformed, creating an irregular gap above the headlamp and fender. The lower front bumper and grille trim also have broken sections and displaced edges. The right front wheel-well liner or splash shield is missing in the damaged area, leaving inner wheel-well components exposed. A detached black bumper-cover panel is shown separately on the ground; it has cracking, deformation, and broken mounting tabs. No mechanical, structural, or operational inspection results are provided. The exposed components and damage around the headlamp, fender, bumper, grille, and wheel well should be professionally inspected before purchase to determine whether additional damage is present and whether the vehicle is safe and economically practical to repair. VIN decoding identifies this vehicle as a 2017 BMW X5 sDrive35i, a gasoline-powered SUV with a 3.0-liter six-cylinder engine, eight-speed automatic transmission, and rear-wheel drive (4x2). The vehicle was manufactured in the United States. The provided recall information includes campaign 17V189000, which applies to certain 2017 BMW X5 sDrive35i vehicles and concerns the passenger frontal air-bag inflator module. BMW’s listed remedy was replacement of the air-bag module at no charge. Recall completion should be verified with BMW using the VIN before purchase.