2015 BMW X4 xDrive35i

This 2015 BMW X4 is identified by VIN decoding as an xDrive35i Sport Utility Vehicle with all-wheel drive, a 3.0-liter gasoline engine, and a stated 300 horsepower. It was manufactured in Greer, South Carolina, USA. The auction record lists a salvage certificate with damage exceeding 75% and identifies the primary damage as front end. The available photo assessment reports localized front-left exterior damage and a missing front fog lamp, which partially supports the front-end classification. However, it states that the visible condition does not support the claim of more than 75% damage. Observed damage is concentrated on the vehicle’s left front side. The front-left fender above and behind the wheel opening has a pronounced inward dent with multiple creases around the wheel arch and rear edge. The left front door has several broad horizontal and diagonal creases in its lower and central sections, along with surface scuffing. Additional deformation, creasing, and light-colored scuff marks are visible on both the left front fender and front door. The left-side circular fog-lamp opening in the front bumper is empty; the opposite fog lamp is present. The reported findings are limited to visible exterior damage. Mechanical, structural, suspension, lighting-system, airbag, and electrical condition have not been established and should be checked through a comprehensive physical inspection before purchase. Repairs may require replacement or repair of the affected body panels, refinishing, replacement of the missing fog lamp and associated components, and inspection of adjacent mounting and safety systems. NHTSA records list several recalls relevant to 2015 BMW X4 vehicles, including recalls involving the driver’s frontal air-bag inflator, child-seat lower anchor bars, and—specifically for certain 2015 X4 xDrive35i vehicles—the driver’s air-bag inflator. A separate exterior-mirror recall applies only to vehicles manufactured during a specified July 2014 production period, so applicability depends on the vehicle’s build date. Recall completion should be confirmed with BMW or an authorized dealer using the VIN before operation.