2016 BMW X4 xDrive28i

This 2016 BMW X4 is listed with a salvage certificate and an auction condition designation of “over 75% damage.” The auction’s primary-damage classification is FRONT END. Stage 1’s photo-based assessment supports the stated front-end damage classification; however, the photographs cannot confirm the auction claim that the damage exceeds 75%. The visible damage is concentrated at the front, particularly the image-right corner. The painted front bumper cover and associated fascia panels are missing, exposing the bumper reinforcement, radiator area, mounting components, and lower front structure. The headlamp assembly is also missing from the image-right front corner. The hood has an upward deformation and irregular crease along its image-right front edge and corner. Both kidney-grille openings lack their normal grille inserts or slat assemblies, and dark internal components are visible behind them. Lower front fascia and wheel-arch liner plastics are missing or broken, with loose plastic material hanging below the front corner. The available findings do not establish the condition of the radiator, cooling system, structural components, suspension, steering, airbags, wiring, or other concealed systems. These areas should be physically inspected before purchase, along with the extent of any required parts replacement, alignment, and body repair. VIN decoding identifies the vehicle as a 2016 BMW X4 xDrive28i sport utility vehicle with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and a reported output of 241 horsepower. The vehicle was manufactured in Greer, South Carolina, USA. Two NHTSA recalls are listed for certain vehicles of this make, model, and year range. Recall 16V333000 concerns lower child-seat LATCH anchor bars that may become damaged when used with rigid European-ISOFIX connectors; the specified remedy is reinforcement of the anchor bars and vehicle body. Recall 24V608000 concerns an improperly sealed electrical connector at the engine water pump, which may short-circuit and increase fire risk; the remedy involves inspection or replacement of the water pump and connector and installation of a protective shield. Recall applicability and completion for this specific vehicle should be verified by VIN with BMW or an authorized dealer.