2016 BMW X4 xDrive28i

The vehicle is listed with a salvage title, and the auction identifies the primary damage as front-end damage. The visible findings support that classification: the front bumper cover, kidney grille assemblies, surrounding grille trim, and both headlamp assemblies are missing. The front bumper reinforcement and internal front-end components are exposed. The hood’s front edge is deformed and uneven, with irregular gaps, while the leading sections of both front fenders around the lamp openings are severely deformed. A lower front underbody plastic panel is also detached and hanging below the vehicle. Additional body damage is present at both sides of the rear passenger compartment. The left rear door has a large inward dent with multiple creases, and the left rear quarter panel is dented and creased near the wheel arch. The right rear door has a broad dent and creased surface below the handle, and the right rear quarter panel is deformed adjacent to the rear wheel arch. The rear bumper has a long, light-colored surface scuff across its lower central section. The VIN decodes this vehicle as a 2016 BMW X4 xDrive28i, an all-wheel-drive SUV with a 2.0-liter four-cylinder gasoline engine rated at 241 horsepower. It was manufactured in Greer, South Carolina, USA. The supplied information does not establish the condition of the engine, transmission, cooling system, suspension, steering, drivetrain, airbags, or other internal and mechanical components. A complete physical inspection and diagnostic scan are recommended before purchase, particularly because the front-end components are exposed or missing. Two BMW safety recall campaigns are listed for this model and year: campaign 16V333000 concerning possible damage to the child-seat lower anchor bars, and campaign 24V608000 concerning the electrical connector and water-pump cooling system, which may create a fire risk. Recall completion should be verified with BMW using the VIN before operation or purchase.