2016 BMW X3 xDrive35i

The auction record lists the vehicle as having a salvage certificate with “more than 75% damage” and identifies the primary damage as UNDERCARRIAGE. The undercarriage classification cannot be confirmed or contradicted from the available exterior photographs and requires a physical inspection. The photographs independently show substantial front-end collision damage and multiple side-panel dents. The front bumper cover and lower front fascia are missing, detached, or severely broken, with exposed internal components and loose plastic pieces visible around the front end. The front corner near the headlamp and fender is deformed or displaced. The hood has pronounced creasing and deformation near its front edge and center-left area. Multiple shallow-to-moderate dents, creases, and irregular depressions are visible across the front and rear door panels, lower side body areas, and rocker-side area. Additional dents are present on the rear quarter panel, including the area below and ahead of the tail lamp and near the rear bumper-side section. The driver steering-wheel airbag, passenger-side dashboard airbag, and a side-curtain airbag are visibly deployed. Several instrument-cluster warning indicators are illuminated, including ABS, brake, check-engine, restraint, stability-control, and tire-pressure warnings. Center-console trim is missing around the storage and control area, leaving openings and wiring or components visible. The VIN decode identifies this vehicle as a 2016 BMW X3 xDrive35i, an all-wheel-drive SUV with a 3.0-liter, six-cylinder gasoline engine. It was manufactured in the United States. The decoded vehicle information does not establish the condition or operation of the engine, drivetrain, restraint system, electrical systems, or undercarriage. The recall data includes campaign 16V333000 concerning the lower child-seat anchor bars on certain 2011–2017 BMW X3 xDrive35i vehicles; the remedy involves reinforcement by a BMW dealer. The available recall information also includes diesel-specific campaigns and a water-pump campaign for specified X3 28i variants, which do not match the decoded xDrive35i configuration. Recall completion status for this vehicle should be verified by VIN with BMW or an authorized dealer. A comprehensive physical inspection is strongly recommended, including the structure and undercarriage, suspension and steering, cooling and engine systems, wiring, airbags and pretensioners, braking system, and diagnostic fault codes.