2016 BMW X3 xDrive28i

The vehicle is listed with a salvage certificate indicating more than 75% damage, with “FRONT END” recorded as the primary damage. The available photo assessment states that the missing front bumper, missing grille components, and deformed hood support the front-end damage classification; however, the photos do not provide sufficient evidence to confirm that the vehicle has more than 75% damage. The front bumper cover is missing across the front, exposing the bumper reinforcement and internal front-end components. Both central kidney-grille inserts are absent, and the radiator area and internal supports are visible through the openings. The lower front fascia and air-intake trim are also missing, leaving open gaps beneath and beside the headlights. The hood has a broad raised and creased deformation across its front-center section above the grille. Multiple light-colored surface scuffs and streaks are visible along the lower portions of the visible front and rear side doors. According to the VIN decode, this is a 2016 BMW X3 xDrive28i SUV with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and a decoded output of 241 horsepower. It was manufactured in the United States. The available data does not identify the transmission. NHTSA records list several recalls associated with the 2016 X3. The child-seat lower-anchor recall applies to certain X3 sDrive28i, xDrive28i, and xDrive35i vehicles, while the 2024 water-pump electrical-connector recall includes the 2013–2017 X3 sDrive28i and xDrive28i. The other listed recalls concern diesel-powered X3 xDrive28d vehicles and do not correspond to the decoded gasoline xDrive28i configuration. Recall completion status is not provided and should be verified with BMW using the VIN. The visible damage indicates that substantial front-end repair and replacement work will be required. The condition of components behind the missing exterior parts, including the cooling system, structural members, lighting, sensors, wiring, and safety systems, cannot be determined from these findings and should be physically inspected before purchase.