2013 BMW X3 xDrive28i

This 2013 BMW X3 is listed with a salvage title and an auction-reported primary damage classification of FRONT END. The auction classification is an unverified claim; Stage 1 reports that the visible severe hood and front bumper damage supports the reported front-end damage, while the salvage-title status cannot be confirmed from the photos. The documented damage is concentrated at the front of the vehicle. The hood has extensive, severe deformation, including multiple deep creases, sharp folds, and an uneven leading edge. It is visibly raised above the surrounding front body panels, with significant damage extending across the center and front edge. The front bumper cover also has severe damage. It is cracked and torn at the corners and lower fascia, with a large open section, separated bumper material, and an exposed dark area behind the fascia. Additional moderate cracks and splits extend across the center and left side of the bumper as viewed, including around the lower grille openings. The visible findings do not establish the condition of components behind the damaged exterior, so the radiator support, cooling system, lighting, sensors, engine-bay components, structural areas, and safety systems should be physically inspected before purchase or repair decisions. The VIN decodes as a 2013 BMW X3 xDrive28i Sport Utility Vehicle with all-wheel drive, a gasoline 2.0-liter engine, and six reported cylinders. The vehicle was manufactured in the United States, and the decoded VIN information lists a 241-horsepower engine. Official recall records provided for this model and year include recalls involving the driver’s frontal air-bag inflator, child-seat LATCH anchor bars, brake-assist vacuum-system components, the passenger air-bag instrument-panel tear seam, and the electric water-pump connector. Recall campaign 24V527000 concerns a driver-air-bag inflator, while campaign 24V608000 concerns the water-pump electrical connector and potential fire risk. The records also include campaigns 17V495000, 16V333000, 14V627000, 13V454000, and 13V570000. Recall completion for this specific vehicle should be verified with BMW or an authorized dealer using the VIN. Overall, the vehicle has substantial visible front-end collision damage, particularly to the hood and front bumper cover. A comprehensive inspection is recommended before purchase, including structural measurements, mechanical and cooling-system checks, diagnostic scanning, and verification that all required safety and recall repairs have been completed.