2016 BMW X3 xDrive28i

The vehicle is listed with a salvage collision title and an auction primary-damage classification of FRONT END. Stage 1 reports that the visible evidence supports this unverified classification and is consistent with collision damage. Extensive front-end components are missing, although structural damage cannot be confirmed from the available photos. The front bumper cover, center kidney grille, and left headlamp assembly are absent. The missing left-front fascia and wheel-arch components expose the inner fender area, washer reservoir, brackets, ducting, wiring areas, radiator, intercooler, bumper reinforcement area, and other internal front-end components. The exposed bumper support and side mounting components at both front corners appear bent, displaced, and irregular. Sections of the exposed radiator and lower intercooler cooling fins are also visibly deformed. The left front door has a broad inward dent or crease with localized light-colored paint scuffing. The condition of concealed components, cooling-system integrity, wiring, sensors, suspension, steering, airbags, and the underlying front structure cannot be established from these findings and should be verified through a comprehensive physical inspection before purchase or repair. The VIN decodes as a 2016 BMW X3 xDrive28i Sport Utility Vehicle with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and approximately 241 horsepower. It was manufactured in Greer, South Carolina, USA. NHTSA recall information provided for this model includes a child-seat lower-anchor reinforcement recall (16V333000) and a water-pump electrical-connector recall (24V608000), both listed for gasoline X3 xDrive28i vehicles. The supplied recall data also includes diesel-specific EGR and high-pressure fuel-pump campaigns for X3 xDrive28d vehicles; these do not correspond to the decoded gasoline powertrain. Recall completion should be confirmed with BMW using the VIN.