2014 BMW X3 XDRIVE28I

The auction record lists “Front End” as the primary damage classification. Stage 1 reports that the visible evidence supports this claim through the deformed hood edge, broken grille, damaged front bumper, separated lower front trim, and cracked windshield. Stage 1 also notes substantial additional damage to the rear liftgate and rear bumper. At the front, the right kidney-grille section has broken and missing slats, and multiple fascia components around the upper radiator opening are fractured, separated, or absent. The hood leading edge is creased and deformed, with an uneven contour and irregular opening above the grille. The front bumper cover has extensive scuffing, cracks, and separated sections, particularly across the center and right side, while the lower bumper trim and grille area are detached and hanging below the normal bumper line. At the rear, the liftgate has severe structural deformation, including a large central depression and multiple sharp creases across the license-plate recess and lower panel. The rear bumper has horizontal scrape marks, and its lower center section is separated, leaving an open gap and extending below the surrounding bumper surface. The windshield has multiple linear cracks across the left and central areas, including diagonal cracks extending toward the center. A red BRAKE warning indicator is illuminated in the instrument cluster; the provided finding does not establish the cause. The vehicle should undergo a complete mechanical, braking, restraint-system, and structural inspection before purchase or road use. VIN decoding identifies this vehicle as a 2014 BMW X3 xDrive28i, an all-wheel-drive SUV with a 2.0-liter four-cylinder gasoline engine, manufactured in the United States. Official NHTSA records list several recalls associated with this model and year, including recalls concerning the child-seat lower anchors, brake vacuum assistance, the driver’s air-bag inflator, and the electric water-pump connector. The applicable recall records specify free dealer remedies, including reinforcement or replacement work, inspection, protective shielding, or other corrective procedures as applicable. Recall completion should be verified by VIN with BMW or an authorized dealer before purchase.