2012 BMW X3 xDrive28i

The vehicle is a 2012 BMW X3 xDrive28i (VIN 5UXWX5C54CL722132), classified as an all-wheel-drive SUV. NHTSA data identifies a 3.0-liter six-cylinder gasoline engine rated at 240 hp. The vehicle was manufactured in Greer, South Carolina, USA. The auction record identifies the vehicle as having a salvage flood title, with “WATER/FLOOD” listed as the primary damage. However, Stage 1’s photo review found that the flood and water claims were not supported by the available exterior, interior, dashboard, cargo-area, and engine-bay views. No visible horizontal tide line, water staining, silt residue, mold-like discoloration, or visible corrosion was reported on the photographed components. The instrument cluster was also visible without widespread warning indicators. This represents a reported mismatch between the auction claim and the available photographic evidence; physical inspection is still recommended. The documented visible damage is minor and cosmetic. A small linear surface scratch is present on the left front fender above the wheel arch. Light abrasion and scuff marks appear on both front bumper corners, including the lower left bumper area and the right side near the fog-lamp area. A small irregular white paint-transfer or scuff mark is visible on the dark trim at the lower rear liftgate/bumper area. Inside, the black leather driver-seat outer bolster shows creasing and light surface wear. No other damage findings were provided. Two relevant NHTSA safety recalls are listed for this model and year. Recall 17V495000 concerns a potentially improperly welded driver frontal air-bag inflator that could separate during deployment; BMW’s stated remedy is replacement of the driver’s front air-bag module at no charge. Recall 16V333000 concerns possible damage to the lower child-seat LATCH anchor bars when used with rigid-style European ISOFIX connectors; BMW’s stated remedy is installation of reinforcing brackets at no charge. Recall completion should be verified with BMW or an authorized dealer using the VIN.