2018 BMW X3 sDrive30i

This 2018 BMW X3 has an unverified auction designation of “SALVAGE CERTIFICATE,” with “FRONT END” listed as the primary damage. Stage 1 reports that the visible missing and damaged front-end components support the unverified FRONT END damage code. However, the salvage certificate status cannot be confirmed or contradicted from the photographs alone. The front end has severe collision-related damage. The front bumper cover and outer fascia are missing across the visible front width, exposing the cooling components, brackets, mounting structures, and radiator area. Both central kidney grille assemblies are absent. Lower exterior trim and wheel-arch liner material are missing on both the front-left and front-right sides, leaving the areas behind the front wheels exposed. The hood has irregular deformation and raised, uneven contours across its leading section and near the left front corner. The available findings do not establish the condition of components behind the removed fascia, including the cooling system, structural mounting points, lighting, sensors, driver-assistance equipment, wiring, or restraint systems. A thorough physical inspection and diagnostic scan will be required before determining the full repair scope, roadworthiness, or total repair cost. According to the VIN decode, this is a U.S.-built BMW X3 Sport Utility Vehicle with a 2.0-liter, four-cylinder gasoline engine, an eight-speed automatic transmission, and all-wheel-drive designation. The decoded trim is listed as sDrive30i, so the drivetrain and equipment should be verified against the vehicle itself and its records. NHTSA records identify multiple recalls for the 2018 BMW X3, including possible issues involving Active Lane Keeping Assistant steering-wheel compatibility, rear brake-caliper performance, the instrument-panel casing, front seatback frames, turn-signal illumination, rearview-camera software, the front passenger occupant-classification system, instrument-cluster software, rear-spoiler attachment, and rear cargo-rail attachment bolts. Recall completion cannot be determined from the information provided; the buyer should verify the VIN-specific recall status with BMW or an authorized dealer and confirm that all applicable repairs have been completed.