2024 BMW X3 sDrive30i

The auction record identifies the vehicle as having a salvage certificate of title, with “SIDE” listed as the primary damage classification. The salvage title status cannot be confirmed from the photographs. Visible extensive damage to the left-side doors and lower rocker-area trim supports the listed side-damage classification. The left front and left rear door outer panels have severe deformation, including deep dents and multiple sharp creases across their central and lower sections. A section of the lower black side skirt/rocker trim beneath the doors is missing, leaving mounting points and an irregular open area exposed. At the left front corner, the area around the headlamp and upper front bumper has an irregular opening, with damaged or missing black trim and exposed material around the lamp edge. The left front corner of the hood also has a wide, uneven gap relative to the adjacent headlamp and fender area. These findings indicate that the vehicle will require substantial body and trim repairs. The provided findings do not establish the condition of hidden structural, mechanical, electrical, or safety-system components, so a comprehensive inspection is recommended before purchase or repair planning. VIN decoding identifies this vehicle as a 2024 BMW X3 sDrive30i SUV, manufactured in Greer, South Carolina. It is equipped with a 2.0-liter four-cylinder gasoline engine rated at 248 horsepower. The decoded safety equipment includes standard front, side, curtain, and knee airbags, electronic stability control, traction control, forward-collision warning, pedestrian automatic emergency braking, rear automatic emergency braking, parking assistance, and rear cross-traffic alert. The supplied NHTSA recall information lists three campaigns applicable to this model range: recall 23V770000 concerning steering-gear tightening; recall 25V106000 concerning second-row side-door locking modules; and recall 26V438000 concerning possible overheating of the engine starter. Recall repairs are described as free through BMW, where applicable. The owner should verify the VIN-specific recall status and completion of all required remedies with BMW or NHTSA before operating the vehicle.