2025 BMW X3 30 XDRIVE

This 2025 BMW X3 is listed by the auction with a Salvage condition and “Rear” as the primary damage classification. Stage 1’s photo review found that the visible evidence supports the stated rear damage area: the rear bumper cover is missing, rear components are exposed, and deformation is visible at the lower liftgate and rear underbody. Stage 1 also noted that salvage status cannot be confirmed from exterior photographs alone. The rear bumper cover is absent across the lower rear of the vehicle, exposing internal bumper components, heat shielding, mounting areas, and wiring. The lower-right portion of the rear liftgate has an inward dent and irregular crease near the lower edge and right-side badge. The exposed rear underbody heat-shield panels are creased and deformed, with some sections hanging below the rear body. A red rear lamp or reflector component is detached and is shown separately from the removed bumper cover. The VIN decodes as a 2025 BMW X3 30 xDrive, an all-wheel-drive SUV assembled in the United States. The vehicle is equipped with a 2.0-liter, four-cylinder gasoline engine rated at 255 horsepower. Transmission details and the specific engine model were not provided. Official NHTSA records list several recalls for applicable 2025 BMW X3 vehicles. These include campaign 24V772000 for possible damage to the front passenger air-bag fabric; 24V856000 for an incorrectly assembled right-side head-curtain air-bag gas generator; 24V909000 for a potentially cracking left front swivel bearing; 25V109000 and 25V202000 for starter-generator, battery-cable, or electrical-connection issues that may cause stalling or overheating; 25V154000 for rear brake hoses that may leak; 25V247000 for potentially damaged front brake discs and pads; and 25V857000 for software-related unintended steering-wheel movement while the vehicle is stationary. The listed remedies generally involve inspection, repair, replacement, or a software update at no charge. Recall applicability and completion should be confirmed directly by VIN with BMW or NHTSA before purchase. The vehicle should undergo a complete physical inspection before repair or operation, including examination of the rear structural areas, bumper reinforcement and mounting points, liftgate alignment, rear lighting and wiring, heat shielding, exhaust-area components, parking and safety sensors, and the underbody. The recall repairs and any post-collision diagnostic procedures should also be verified.