2018 BMW X2 XDRIVE28I

The 2018 BMW X2 is recorded with a salvage condition and an auction primary-damage designation of “Right Side.” Stage 1’s photo review found substantial front-end collision damage and visible damage on both sides; therefore, the right-side designation is only partially supported and does not fully represent the visible damage. The front bumper cover, grille assembly, lower air-intake panels, and outer fascia at both front corners are missing. The bumper reinforcement, cooling components, radiator and intercooler surfaces, internal brackets, liners, and other front-end mounting areas are exposed. Open gaps and missing panels are visible across the lower and corner sections of the front end. The condition of these exposed components, as well as any underlying structural or mechanical damage, requires physical inspection. Both front doors have moderate collision damage. The near-side door has a large horizontal crease, multiple dents, and scraped or distorted paint across the central and lower areas. The opposite-side front door also has a pronounced crease, substantial denting, and surface scuffing. Both front fenders are deformed around the wheel openings; the adjacent mounting areas and surrounding trim are missing or exposed. Two detached black wheel-arch trim pieces were observed on the floor beside the vehicle. Factory VIN data identifies this vehicle as a BMW X2 xDrive28i, a gasoline-powered 2.0-liter four-cylinder turbocharged SUV with all-wheel drive and an eight-speed automatic transmission. The vehicle was manufactured by BMW AG in Germany. NHTSA recall campaign 18V465000 includes certain 2018 BMW X2 xDrive28i vehicles. The recall concerns incorrect crankshaft-sensor firmware that may cause the engine to stall. BMW’s stated remedy is replacement of the crankshaft sensor at no charge. Recall completion should be confirmed by checking this VIN with BMW or NHTSA. The provided findings document extensive visible collision damage, but they do not establish the condition of the engine, transmission, cooling system, suspension, steering, airbags, sensors, wiring, or vehicle structure. A comprehensive inspection and diagnostic scan are recommended before purchase.