2025 BMW X2 XDRIVE28I

The 2025 BMW X2 is listed with a “Clear” auction condition, while the auction’s primary-damage code is “Front End.” Stage 1 reports that the visible front-end damage contradicts the “Clear” condition claim and supports the stated “Front End” classification. The most significant visible damage is severe deformation of the hood. The hood is deeply pushed inward around the BMW emblem and right-center area, with sharp creasing, an uneven raised and folded surface, and an irregular gap above the grille. The lower front bumper has moderate scuffing, cracking, and displaced or hanging black trim sections along the lower grille opening. The kidney grille surround and adjacent trim also show scuffing, surface breakage, and irregular alignment with the bumper. The instrument cluster displays a brake-system message and warning indicators for ABS, the brake system, tire pressure, stability control, steering, and the check engine system. The available findings do not establish the cause or the vehicle’s mechanical condition, so a comprehensive diagnostic scan and physical inspection are recommended before purchase or operation. According to the VIN decode, this is a Germany-built BMW X2 xDrive28i SUV with all-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine rated at 241 hp, and standard safety equipment including ABS, electronic stability control, traction control, forward-collision warning, pedestrian automatic emergency braking, rear automatic emergency braking, lane-departure warning, and direct tire-pressure monitoring. The supplied recall information includes campaigns concerning the integrated brake system and front seat-belt retractors. The brake-system recalls describe a possible loss of power brake assist and improper ABS or stability-control operation. The seat-belt recall concerns possible damage to both front retractor torsion bars. Recall completion and VIN-specific applicability should be confirmed with BMW or NHTSA before driving the vehicle.