2024 BMW X2 M35i

The auction record identifies the vehicle as having a salvage certificate with a claimed damage level exceeding 75%, and lists the primary damage as front end. Stage 1 reports that the visible evidence supports the FRONT END damage classification; however, the exterior photographs cannot confirm the claimed “over 75% damage” level. The vehicle has severe front-end collision damage. The front bumper cover, grille sections, surrounding fascia panels, and both headlamp assemblies are missing, leaving open cavities and exposing cooling components, wiring, brackets, mounting points, and other front-end parts. Lower front trim and underbody panels are detached, with loose sections visible beneath the front end. Additional damage is visible on the left side. The left exterior mirror has exposed wiring and a detached component hanging below the housing. The left front wheel-arch trim is missing, and the left front fender is deformed and creased around the rear and upper wheel-arch area. Blue paint transfer and surface scratches are present on the fender. The upper forward section of the left front door has localized denting and creasing below and behind the mirror. A light surface scratch is also visible on the hood. The VIN decodes as a 2024 BMW X2 M35i sport utility vehicle, manufactured by BMW AG in Germany. It is equipped with a 2.0-liter turbocharged gasoline four-cylinder engine; the decoded data lists 312 horsepower. The VIN data does not specify the drivetrain or transmission. NHTSA records list recall campaign 24V104000, concerning a possible malfunction of the integrated brake system that may affect power brake assist, ABS, and dynamic stability control. Campaign 24V697000 also applies to certain 2024 BMW X2 vehicles and concerns possible weld failure in the integrated brake control module, which may cause loss of power brake assist or rear brake function and affect ABS and dynamic stability control. Both recalls specify free replacement of the integrated brake system by an authorized dealer. Recall completion should be verified for this specific VIN before purchase or operation.