2017 BMW X1 xDrive28iBr

This 2017 BMW X1 is listed with a Salvage Certificate of Title, and the auction’s primary-damage classification is FRONT END. These are auction-record claims. Stage 1 reports that the visible evidence supports the FRONT END classification through extensive missing and damaged front-end components; however, the Salvage Certificate of Title status cannot be confirmed from the photos. The front end has extensive collision damage. The bumper assembly, grille sections, lower front trim, and both headlamp assemblies are missing, exposing the front reinforcement beam, radiator/condenser area, wiring, and lower cooling components. Broken or missing plastic mounting pieces are visible around the radiator support and lower front structure. The detached bumper cover has broken mounting areas, damaged edges, and separated grille sections. The hood has creasing and deformation along its leading edge and both front corners, with chipped, scraped, and abraded white paint. Additional light linear scuffing is visible across the hood. Both front corners have severe damage, including missing exterior components, exposed internal parts, irregular panel edges, and torn or displaced liner material. At the rear, trim or body material adjacent to the left tail lamp is missing, exposing mounting holes and black internal material. The left rear lamp mounting area has exposed fasteners and an irregular opening around the installed lamp. Light horizontal scuffing and discoloration are also present on the lower rear bumper cover. According to the VIN decode, this is a left-hand-drive 2017 BMW X1 xDrive28i Sport Utility Vehicle with all-wheel drive, a 2.0-liter turbocharged four-cylinder gasoline engine, and an eight-speed automatic transmission. The vehicle is listed as having five seats and was manufactured in Brazil. Two NHTSA recalls are listed for the 2016–2017 BMW X1 xDrive28i: campaign 16V747000 concerns the driver’s seat-belt emergency locking retractor, and campaign 19V349000 concerns impact protection of the interior B-pillars. Recall completion should be verified with BMW or an authorized dealer using the VIN. The visible damage indicates that substantial front-end replacement and repair work will be required. The condition of components not visible in the provided findings—including the engine, transmission, cooling system, suspension, steering, electrical systems, safety restraints, and structural areas—has not been established and should be checked through a comprehensive physical inspection.