2018 BMW X1 xDrive28i

The vehicle is recorded as a 2018 BMW X1 xDrive28i with all-wheel drive, a 2.0-litre turbocharged four-cylinder gasoline engine, and an eight-speed automatic transmission. NHTSA data identifies it as a five-seat SUV manufactured by BMW AG in Germany. The auction record lists the vehicle as having a Salvage Certificate with “FRONT END” as the primary damage classification. The visible extensive front-end damage supports the unverified “FRONT END” claim. The Salvage Certificate status cannot be confirmed or contradicted from the available images. The front end has severe collision damage. Multiple plastic components behind the bumper are detached or missing, exposing internal components and leaving irregular broken edges. The hood is extensively crushed and buckled, with pronounced creases, a raised and uneven leading edge, and an irregular gap above the front fascia. The front bumper cover is cracked, torn, and displaced across the center and left corner; portions of the lower fascia are missing or hanging. The center kidney grille has broken and missing vertical slats, and its opening is distorted with components visible behind it. A detached lower grille or trim section is lying beside the vehicle, and the corresponding opening is incomplete. The instrument cluster displays a “Right low beam malfunction” message and a lighting warning indicator. The headlamp system and associated wiring should be tested, along with the exposed front-end components, cooling system, structural mounting points, steering and suspension, airbags, sensors, and driver-assistance systems. The available findings do not establish the condition of these areas or whether the vehicle is safe to drive. A comprehensive physical inspection and diagnostic scan will be required before purchase or repair planning. NHTSA recall records list four campaigns associated with this vehicle line: 18V465000 concerning crankshaft-sensor firmware that may cause stalling; 19V601000 concerning incorrectly assembled steering tie rods; 19V074000 concerning taillight attachment brackets; and 19V349000 concerning B-pillar interior trim and occupant protection. Recall completion status for this vehicle should be verified with BMW using the VIN.