2016 BMW X1 xDrive28i

The auction record identifies this 2016 BMW X1 as having a salvage title and lists the primary damage as “ALL OVER.” Stage 1 reports that the visible evidence supports the reported extent, with substantial damage at the front, left side, roof, windshield, and interior. The photos cannot confirm whether the damage mechanism was a rollover, and the salvage-title status cannot be confirmed from the photos. The vehicle has severe front-end damage. The hood is heavily depressed and creased across the centre and right side, with additional deformation along the front edge. The front bumper cover, grille, and lower fascia are missing, broken, or displaced, exposing the bumper reinforcement, radiator-area components, and other internal front-end parts. The right front fender edge and bumper corner are also broken and displaced. Loose plastic components are visible below the front end. The left front fender and left front door show extensive crushing, sharp creases, displaced metal, and torn or open panel gaps. The left rear door has deep dents, creases, and distorted outer panels. The front section of the roof is visibly crushed and folded, including the roof edge above the windshield and left-side doors. The windshield is extensively shattered with multiple radiating cracks and dense areas of fracture. Both the driver-side steering-wheel/dashboard airbags and a left-side curtain airbag are visibly deployed. This indicates that the restraint system will require detailed inspection and likely replacement of deployed components, sensors, related modules, and possibly seat-belt pretensioners; the exact repair scope cannot be established from the findings alone. The front seat cushion also has multiple tears in the leather upholstery. The fuel-filler door is missing, and the rear bumper and lower rear body have light scuffing. Factory data identifies the vehicle as a 2016 BMW X1 xDrive28i, an all-wheel-drive SUV with a 2.0-litre four-cylinder gasoline engine. The vehicle was manufactured by BMW AG in Germany. NHTSA records list three recalls associated with 2016 BMW X1 models: a driver’s seat-belt emergency locking retractor issue, a roof-and-B-pillar interior impact-protection issue, and a steering gearbox issue affecting one specified 2016 X1 manufactured on October 19, 2015. Recall applicability and completion status should be verified by checking this vehicle’s VIN with BMW or an authorised dealer before purchase. Given the visible roof deformation and deployed airbags, the roof, pillars, steering system, restraint system, and surrounding structure require comprehensive professional inspection before any attempt to repair or operate the vehicle.