2018 BMW X1 xDrive28i

The auction record lists the vehicle as “GRAVEMENT ACCIDENTE (P)” (severely accident-damaged) with “FRONT END” as the primary damage. The supplied Stage 1 assessment states that the visible evidence supports the front-end damage claim and shows extensive collision damage consistent with the stated severe-accident condition. The front end has severe damage. The hood is substantially deformed along its front and near-side edges, with an uneven raised gap above the headlamp and front fascia. The front bumper cover and central kidney grilles are missing, exposing the aluminum reinforcement beam, radiator area, wiring, and lower front components. The near-side front fender and wheel-arch panel are also absent, leaving the wheel-well liner and adjacent components exposed. The near-side headlamp is separated from the surrounding bodywork, with visible gaps and damaged or missing lower mounting and trim pieces. Lower front fascia and splash-panel sections are missing or broken, with brackets, wiring, and underbody components visible. These findings indicate that extensive parts replacement and inspection of the front-end structure, cooling system, wiring, lighting, steering, suspension, and safety systems will be required. The supplied findings do not confirm the condition of mechanical or concealed components. Minor cosmetic damage is present at the left rear bumper corner, where white abrasion and scuff marks are visible. VIN decoding identifies this vehicle as a 2018 BMW X1 xDrive28i SUV with all-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine, and an eight-speed automatic transmission. It was manufactured by BMW AG in Germany. NHTSA records list several recalls applicable to 2018 BMW X1 xDrive28i vehicles, including campaign 18V465000 for crankshaft-sensor firmware that may cause stalling, campaign 19V601000 for incorrectly assembled steering tie rods, campaign 19V074000 concerning taillight attachment brackets, and campaign 19V349000 concerning B-pillar interior trim and occupant protection. Recall completion should be verified by VIN with BMW or an authorized dealer before purchase or road use.