2016 BMW X1 xDrive28i

This 2016 BMW X1 is listed with a SALVAGE CERTIFICATE and a FRONT END primary-damage classification. Stage 1 reports that the visible front-end damage supports the FRONT END classification, while the SALVAGE CERTIFICATE status cannot be confirmed from the photographs. The main damage is concentrated at the right front corner. The front bumper cover is severely torn and deformed, with a large opening exposing components behind it, and the lower corner is displaced. A lower bumper grille or trim section is detached and hanging away from the bumper. The leading edge of the hood is also deformed, with an uneven, raised contour above the kidney grilles. Several minor surface scuffs are visible on the left rear bumper and adjacent lower quarter panel. The VIN decode identifies the vehicle as a BMW X1 xDrive28i sport utility vehicle with all-wheel drive, a 2.0-litre four-cylinder gasoline engine, and 228 horsepower. It was manufactured by BMW AG in Germany. The supplied NHTSA recall records include campaigns concerning the driver’s seat-belt emergency locking retractor (16V747000), interior B-pillar impact protection (19V349000), and a steering gearbox issue affecting one specific 2016 X1 manufactured on October 19, 2015 (15V887000). Recall completion should be verified with BMW or an authorised dealer using the VIN.