2024 BMW X1 xDrive28i

This 2024 BMW X1 is being offered with a salvage certificate of title. The auction lists the primary damage as FRONT END. Stage 1 reports that the visible evidence supports this classification: the front bumper, grille, and related fascia components are missing. Stage 1 also reports substantial additional damage at the right rear quarter panel and rear bumper. The front bumper cover and central grille/fascia are absent, exposing the radiator area, bumper reinforcement, lower front structure, wiring, and other internal components. Wheel-arch trim is missing at the left and right front wheel openings, leaving the mounting points and wheel-arch edges exposed. At the rear, the rear bumper cover and lower trim are missing, with the reinforcement, mounting structure, and wiring exposed. The right rear quarter panel is visibly creased and deformed around the wheel arch and rear lamp opening. The right rear outer lamp assembly is also missing, leaving its cavity and mounting structure exposed. The provided findings document significant exterior collision damage, but they do not establish the condition of the underlying structure, cooling system, suspension, steering, airbags, electrical systems, drivetrain, or braking systems. A comprehensive physical inspection and diagnostic assessment will be required before repair or road use. VIN decoding identifies the vehicle as a Germany-built 2024 BMW X1 xDrive28i SUV with all-wheel drive, a turbocharged 2.0-litre four-cylinder gasoline engine rated at 241 horsepower, and standard safety equipment including ABS, electronic stability control, forward-collision warning, pedestrian automatic emergency braking, rear automatic emergency braking, and a rear-visibility system. Official recall records list several brake-system-related recalls applicable to certain vehicles in this model and year range, including recalls 24V104000, 24V697000, and 26V422000. These involve possible loss of power brake assist and/or improper operation of the ABS and Dynamic Stability Control systems. Recall completion should be verified by VIN with BMW or NHTSA before purchase; the listed 26V422000 remedy is scheduled to become searchable by VIN from August 21, 2026.