2026 BMW X1 XDRIVE28I

The auction lists the primary damage as front-end damage. Stage 1’s assessment states that the visible evidence supports this classification: the front bumper, grille, both headlamps, and portions of both front fenders are missing, and the hood is visibly deformed. The front end has extensive collision damage. The bumper cover, grille, surrounding fascia, front-end trim, and several underbody panels are missing, exposing the reinforcement, cooling pack, wiring, radiator area, and other internal components. Both headlamp assemblies are absent. The left and right front fenders are missing, exposing the inner fender areas and components around the front wheels. The hood has pronounced deformation at both front corners, including a raised crease on the right side and an uneven, raised edge on the left. Loose or detached lower trim is also visible near the exposed front structure. The available findings do not establish the condition of the underlying structure, cooling system, wiring, suspension, steering, engine, transmission, airbags, or driver-assistance systems. A comprehensive physical inspection and diagnostic evaluation will be required before repair costs or roadworthiness can be determined. According to the VIN decode, this is a 2026 BMW X1 xDrive28i SUV with all-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine rated at 241 horsepower. The vehicle was manufactured by BMW AG in Germany. Factory-listed equipment includes LED low-beam headlamps, front and rear occupant airbags, electronic stability and traction control, forward-collision warning, pedestrian automatic emergency braking, lane-departure warning, blind-spot monitoring, parking assistance, and a rear visibility system. Several of these systems may require inspection, calibration, or replacement following the front-end damage. Two NHTSA recalls are listed for the 2026 BMW X1. Recall 25V616000 concerns both front seat-belt retractors, which may not properly restrain occupants if damaged during production; the remedy is replacement of both front retractors. Recall 25V717000 concerns one or both rear seat-belt retractors, which may fail to lock as intended; the remedy is replacement of the affected rear seat belts. Recall completion should be verified by VIN before purchase or use.