2025 BMW X1 XDRIVE28I

The auction record lists the vehicle as **Salvage** with **Front End** as the primary damage classification. Stage 1 reports that the visible severe front-end collision damage supports the stated Front End classification; however, salvage title status cannot be confirmed from exterior and interior photos alone. The vehicle is a 2025 BMW X1 xDrive28i, identified by VIN WBX73EF00S5118102. NHTSA data describes it as an all-wheel-drive SUV with a 2.0-liter turbocharged four-cylinder gasoline engine rated at 241 hp. It was manufactured by BMW AG in Germany. The front end has extensive severe collision damage. The hood is heavily deformed across its leading edge and both front corners, with an irregular raised opening above the grille. The front bumper cover is cracked, torn, displaced, and missing sections, exposing dark components at both lower corners. The kidney grille is displaced with open gaps around it, and the surrounding front fascia has large openings and broken or missing trim near the grille and headlamp areas. The front engine-bay plastic covers are also broken, with substantial sections missing. On the driver side, the front fender is deeply crushed and torn around the wheel opening, exposing inner areas. The front wheel and tire are missing from this position, although a tire is visible lying on the ground. The driver-side rocker panel and side skirt are severely torn, displaced, and deformed. Both driver-side doors have visible dents, creases, and deformation. The exterior mirror and driver-side headlamp assembly are absent, leaving mounting, wiring, and surrounding damaged areas exposed. The windshield has multiple cracks and a concentrated fractured area in the upper driver-side section. Multiple airbags have deployed, including the driver steering-wheel airbag, a driver-side upper interior side or curtain airbag, and a large curtain airbag hanging above the rear driver-side seating area. The supplied recall records list three campaigns applicable to this model and model year: recall 24V104000 for a possible integrated brake-system malfunction affecting power brake assist, ABS, and stability-control operation; recall 24V829000 concerning potentially insufficiently strong B-pillar reinforcement plates; and recall 25V616000 concerning possible damage to both front seat-belt retractors. Recall completion and applicability to this specific VIN should be verified with BMW or NHTSA before purchase. Given the extent of the visible structural-area, body, lighting, wheel-position, windshield, and restraint-system damage, the vehicle requires comprehensive professional inspection and repair assessment. The supplied findings do not establish the condition of the engine, transmission, drivetrain, suspension, steering, braking system, electrical systems, or underlying structure.