2015 BMW X1 xDrive28i

This 2015 BMW X1 is listed by the auction with a BILL OF SALE condition and FRONT END as the primary damage classification. The auction’s FRONT END claim is supported by the reported visible damage to the hood, bumper, grille area, fenders, and headlamps. BILL OF SALE is an auction status and cannot be verified from the provided photographs. The front end has severe collision damage. The hood is extensively buckled, deeply creased, and folded across the front and center sections. The left front fender and wheel-arch area are crushed and sharply creased, with torn and displaced sheet metal. The front bumper cover and fascia are severely torn, cracked, scraped, deformed, and displaced, with missing lower trim, open gaps, loose material, and exposed components. Both front headlamp areas are damaged: the right headlamp has a broken or missing outer lens with internal components exposed, while the left headlamp has displaced surrounding bodywork and exposed or missing portions of its housing. The kidney-grille area is moderately displaced, with cracked and deformed surrounding trim. A driver airbag is visibly deployed from the steering wheel. According to the VIN decode, this is a BMW X1 xDrive28i SUV with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and a stated 241 horsepower. The vehicle was manufactured by BMW AG in Leipzig, Germany. Two NHTSA safety recalls are listed for this vehicle configuration. Recall 20V017000 concerns the driver frontal airbag inflator and the risk of inflator rupture; the stated remedy is replacement of the driver airbag. Recall 24V608000 concerns the engine water-pump electrical connector, which may short circuit and increase the risk of fire; the stated remedy includes inspection or replacement of the water pump and connector and installation of a protective shield. Completion status for these recalls is not provided and should be verified with BMW before purchase. The extent of the visible front-end and restraint-system damage indicates that a thorough inspection is required to assess structural components, cooling and electrical systems, lighting, steering and suspension components, airbag and seat-belt systems, and the full repair cost.