2014 BMW X1 SDRIVE28I

The auction lists the primary damage as “Left Front.” Stage 1 reports that the visible evidence supports involvement of the left-front area, but the damage is not limited to that area; extensive damage is also visible across the front bumper, grille, hood edge, and vehicle-right front corner. The front bumper cover has severe damage on both sides and in the center, including extensive white scuffing, cracks, torn sections, separated lower edges, and areas hanging away from the body. The lower grille area is exposed, and a section of the lower front bumper trim or fascia is missing. The vehicle-right bumper corner is visibly separated from the body, with a detached strip extending outward and an open gap beneath it. The vehicle-left corner has multiple scrape marks, chipped paint, and an irregular opening. The kidney grille surround and adjacent painted panels have scuffing, chipped paint, deformation, and irregular gaps. The front edge of the hood is raised and irregular near the grille and headlamp areas, with additional chipped paint and scuffing. Both visible headlamp lenses appear heavily cloudy and yellowed. One side mirror assembly is missing, and detached mirror components, including the housing and glass assembly, are visible on the ground. The instrument cluster displays a red BRAKE indicator, a seat-belt indicator, and an amber warning triangle. The provided findings do not establish the cause of these warnings. A thorough inspection should confirm the condition of the front structure, bumper mounting points, grille and hood alignment, lighting equipment, mirror wiring, braking system, restraint systems, and any mechanical or electrical components affected by the impact. According to the NHTSA VIN decode, this is a 2014 BMW X1 sDrive 28i SUV/MPV manufactured by BMW AG in Leipzig, Germany. It has a 2.0-liter four-cylinder gasoline engine. The decode also lists driver, front-passenger, side, curtain, and driver-knee airbag locations, as well as front-seat-belt pretensioners. Two NHTSA recalls are listed for this vehicle configuration. Recall 20V017000 concerns the driver frontal airbag inflator and calls for replacement of the driver airbag. Recall 24V608000 concerns the engine cooling-system water pump electrical connector and calls for inspection, replacement as necessary, and installation of a protective shield. Recall completion should be verified by VIN with BMW or an authorized dealer before purchase.