2014 BMW X1 sDrive 28i

This 2014 BMW X1 is listed by the auction with Salvage condition and “Front End” as the primary damage. Stage 1 reports that the visible evidence supports the stated front-end damage claim, with extensive missing and damaged front-end components. Stage 1 also notes that Salvage status cannot be confirmed from photographs alone. The front bumper cover and central grille are missing, exposing the bumper reinforcement, cooling openings, radiator, intercooler/cooling-pack components, wiring, and inner front structure. The vehicle-right front headlamp assembly is absent. Lower front fascia and splash-shield pieces are detached or hanging, while the exposed bumper reinforcement has broken or separated sections in the center lower plastic support. Additional damage is visible at the front edge of the hood, the vehicle-right front fender, and the right front wheel-opening edge. The outer wheel-arch trim is missing, exposing the inner wheel-well area. Detached bumper, grille, trim, lamp, and fog-lamp components are shown on the ground, with several plastic mounting sections broken or separated. Light surface scuffing and discoloration are also present on the side doors and lower side bodywork. The instrument cluster displays BRAKE, ABS, SERVICE ENGINE SOON, and stability-control warning indicators. Their underlying causes and whether they are related to the collision are not established by the provided findings. Mechanical, structural, cooling-system, electrical, restraint-system, and alignment conditions require an in-person inspection and appropriate diagnostic testing before purchase or road use. VIN decoding identifies the vehicle as a BMW X1 sDrive 28i, a gasoline-powered SUV with a 2.0-liter four-cylinder engine, manufactured by BMW AG in Germany. The decoded information does not provide drivetrain or transmission details. Two NHTSA safety recalls are listed for this vehicle configuration. Recall 20V017000 concerns the driver frontal air-bag inflator and calls for replacement of the driver air bag. Recall 24V608000 concerns the engine water-pump electrical connector, which may short circuit and increase fire risk; the remedy includes inspection and replacement as necessary, along with installation of a protective shield. Recall completion should be verified with BMW or an authorized dealer using the vehicle identification number.